RKC INSTRUMENT RB Series - Function Block 01 (F)

8. PARAMETER DESCRIPTION
IMR02C15-E4
8-60
Dummy
Function block 01 (F01)
This is the first parameter symbol of Function block 01 (F01).
F01.
Set value 1 (SV1)
Set value 2 (SV2)
Set value 3 (SV3)
Set value 4 (SV4)
Link to the set values SV1 to SV4 of Parameter setting mode and the Set values
(SV) of SV setting mode.
For details of Set value SV1 to SV4, refer to 8.4.2 Parameter setting
item (P. 8-13).
Related parameter
SV setting mode:
• Measured value (PV)/Set value (SV) (P. 8-7)
Parameter setting mode:
• Set value 1 (SV1), Set value 2 (SV2), Set value 3 (SV3), and
Set value 4 (SV4) (P. 8-13)
• SV selection (P. 8-14)
• Timer 1, Timer 2, Timer 3, and Timer 4 (P. 8-15)
• Timer function (P. 8-16)
• Repeat execution times (P. 8-17)
• Setting change rate limiter (up), Setting change rate limiter (down) (P. 8-18)
Engineering mode:
• SV selection (P. 8-61)
• Timer 1, Timer 2, Timer 3, and Timer 4 (P. 8-63)
• Timer function (P. 8-64)
• Repeat execution times (P. 8-64)
• Setting change rate limiter (up), Setting change rate limiter (down) (P. 8-66)
• Setting limiter high (P. 8-93)
• Setting limiter low (P. 8-93)
F01.
SV1
SV2
SV3
SV4