8. PARAMETER DESCRIPTION
8-88 IMR02C15-E4
To display F21 and after, setting ModE (Mode selection [no display]) in F00 to 128 is required.
(Refer to P. 8-52)
Function block 21 (F21)
This is the first parameter symbol of Function block 21 (F21).
F21
Input type
Data range: 0 to 38 (refer to the following table)
The Input type can be changed. Inputs are selectable within each group
(TC/RTD input group, Voltage/Current input group).
Data range Factory set value
0: TC input K
1: TC input K
2: TC input K
3: TC input J
4: TC input J
5: TC input T
6: TC input T
8: TC input S
9: TC input R
10: TC input E
11: TC input B
12: TC input N
13: TC input PLII
14: TC input W5Re/W26Re
15: RTD input Pt100
16: RTD input JPt100
17: TC input K
18: TC input K
19: TC input J
20: TC input J
21: TC input T
22: TC input T
23: TC input T
24: TC input S
25: TC input R
26: TC input E
27: TC input B
28: TC input N
29: TC input PLII
30: TC input W5Re/W26Re
31: RTD input Pt100
−199.9 to +400.0 °C
0.0 to 800.0 °C
−200 to +1372 °C
−199.9 to +300.0 °C
−200 to +1200 °C
−199.9 to +300.0 °C
0.0 to 400.0 °C
0 to 1769 °C
0 to 1769 °C
0 to 1000 °C
0 to 1820 °C
0 to 1300 °C
0 to 1390 °C
0 to 2320 °C
−199.9 to +649.0 °C
−199.9 to +649.0 °C
−100.0 to +752.0 °F
−328 to +2501 °F
−199.9 to +555.0 °F
−328 to +2192 °F
−199.9 to +300.0 °F
0.0 to 600.0 °F
−328 to +752 °F
0 to 3216 °F
0 to 3216 °F
0 to 1832 °F
0 to 3308 °F
0 to 2372 °F
0 to 2534 °F
0 to 4208 °F
−199.9 to +900.0 °F
Based on
model code
Do not set to any number which is not described in the input range
table above. This may cause malfunction.
Continued on the next page.
F21.
INP
To Next Page
Loading...
Need help?
General
