10. SPECIFICATIONS
10-2 IMR02C15-E4
10. SPECIFICATIONS
Measured input
Number of input: 1 point
Input type: TC input: K, J, T, S, R, E, B, N (JIS-C1602-1995)
PL II (NBS), W5Re/W26Re (ASTM-E988-96)
RTD: Pt100 (JIS-C1604-1997)
JPt100 (JIS-C1604-1997, JIS-C1604-1981 of Pt100)
3-wire system
Voltage: 0 to 1 V DC, 0 to 5 V DC, 1 to 5 V DC, 0 to 10 V DC
Current: 0 to 20 mA DC, 4 to 20 mA DC
(Connect a 250 Ω shunt resister to the input terminals)
Input range: TC input
Input type Measured range
K
−199.9 to +400.0 °C, 0.0 to +800.0 °C, −200 to +1372 °C,
−100.0 to +752.0 °F, −328 to +2501 °F
(Accuracy is not guaranteed for less than −100 °C)
J
−199.9 to +300.0 °C, −200 to +1200 °C,
−199.9 to +550.0 °F, −328 to +2192 °F
(Accuracy is not guaranteed for less than −100 °C)
T
−199.9 to +300.0 °C, 0.0 to 400.0 °C, −200 to +400 °C,
−199.9 to +300.0 °F, 0.0 to 600.0 °F, −328 to +752 °F
(Accuracy is not guaranteed for less than −100 °C)
S
0 to 1769 °C, 0 to 3216 °F
(Accuracy is not guaranteed for less than 400 °C)
R
0 to 1769 °C, 0 to 3216 °F
(Accuracy is not guaranteed for less than 400 °C)
E 0 to 1000 °C, 0 to 1832 °F
B
0 to 1820 °C, 0 to 3308 °F
(Accuracy is not guaranteed for less than 400 °C)
N 0 to 1300 °C, 0 to 2372 °F
PLII 0 to 1390 °C, 0 to 2534 °F
W5Re/W26Re
0 to 2320 °C, 0 to 4208 °F
(Accuracy is not guaranteed for less than 400 °C)
RTD input
Input type Measured range
Pt100 −199.9 to +649.0 °C, −199.9 to +900.0 °F
JPt100 −199.9 to +649.0 °C, −199.9 to +900.0 °F
Voltage/Current inputs
Input type Measured range
Voltage 0 to 1 V DC, 0 to 5 V DC,
1 to 5 V DC, 0 to 10 V DC
Current 0 to 20 mA DC, 4 to 20 mA DC
(Connect a 250 Ω shunt resister to
the input terminals)
Programmable range
−1999 to +9999
[The decimal point position
is selectable]
(Factory set value: 0.0 to
100.0 %)
To Next Page
Loading...
