10. SPECIFICATIONS
IMR02C15-E4
10-14
îš„ Loader communication
Loader communication: For RKC communication protocol only
Synchronous method: Start/Stop synchronous type
Communication speed: 9600 bps
Data format: Start bit: 1
Data bit: 8
Parity bit: Without
Stop bit: 1
Protocol: ANSI X3.28-1976 subcategory 2.5, A4
Maximum connections: 1 point (Only COM-K)
Address is fixed at 0.
Connection method: COM-K loader cable (equivalent to W-BV-01-1500)
Interval time: 10 ms
Other:  Power supply from COM-K is available for only internal setting change.
Control and host communication are suspended. For this reason, PV/SV
display indicate “----“and the back light is partially turned off.
 The instrument operates normally when it is restored.
 Host communication is available when the instrument is restored.
To Next Page
Loading...
Need help?
General
