APPENDIX
IMR02C15-E4 A-5
Replacement of the board rubber packing
1. Turn the power OFF.
2. Remove the internal assembly from the case.
Refer to APPENDIX A. Removing the Internal Assembly (P. A-2).
3. Remove the old rubber packing, and then replace the old rubber packing with a new one.
Parts list
RB100 RB400/500 RB700 RB900
Parts code
KFB100-35 KRB400-39 KRB700-311 KRB900-39
Ordering code
00458663 00455130 00473562 00455148
4. Insert the internal assembly in the case.
New rubber packing Old rubber packing
Rubber packing mounting status
To Next Page
Loading...
