Rockwell Automation POINTBlock Series User Manual

Publication 1734-UM001D-EN-P - April 2008
214 Configure POINT I/O Modules for DeviceNet Networks
If your network is up, click Browse.
3. After setting up your system, double-click the module you want to
configure.
If you are online, upload the configuration.
A dialog similar to the following appears.
4. Click the Device Parameters tab to get to the dialog for setting the
parameters.

Rockwell Automation POINTBlock Series Specifications

General

Brand	Rockwell Automation
Model	POINTBlock Series
Category	I/O Systems
Language	English