Rockwell Automation POINTBlock Series User Manual

Publication 1734-UM001D-EN-P - April 2008
228 Configure POINT I/O Modules for DeviceNet Networks
4. From the General dialog, click Device Parameters to see the dialog for
setting parameters.
An EDS Editor dialog appears.
5. From the EDS Editor dialog, click Upload to upload existing
parameters from the device.
6. From the Device Parameters dialog, at the Groups list select
Configuration to select parameters.
7. Select Single to change or configure parameters one at a time or All to
change all selections at once.

Rockwell Automation POINTBlock Series Specifications

General

Brand	Rockwell Automation
Model	POINTBlock Series
Category	I/O Systems
Language	English