Rohde & Schwarz R&S RTB2004 - Page 320

Remote Control Commands
R&S
®
RTB2000
312User Manual 1333.1611.02 ─ 04
Return values:
<Value> Measurement result. If no measurement was executed, no value
(NAN) is returned.
Usage: Query only
MEASurement<m>:RESult:AVG? <AverageValue>
Returns the average value of the current measurement series.
The number of waveforms used for calculation is defined with MEASurement<m>:
STATistics:WEIGht.
Suffix:
<m>
.
1..4
Selects the measurement place.
Query parameters:
<AverageValue> Statistic value
Usage: Query only
MEASurement<m>:RESult:STDDev? <StandardDeviation>
Returns the statistical standard deviation of the current measurement series.
The number of waveforms used for calculation is defined with MEASurement<m>:
STATistics:WEIGht.
Suffix:
<m>
.
1..4
Selects the measurement place.
Query parameters:
<StandardDeviation> Statistic value
Usage: Query only
MEASurement<m>:RESult:NPEak? <NegativePeak>
Returns the minimum measurement result of the current measurement series.
Suffix:
<m>
.
1..4
Selects the measurement place.
Query parameters:
<NegativePeak> Minimum measurement result
Usage: Query only
MEASurement<m>:RESult:PPEak? <PositivePeak>
Returns the maximum measurement result of the current measurement series.
Measurements