Rohde & Schwarz R&S RTB2004 - Page 332

Remote Control Commands
R&S
®
RTB2000
324User Manual 1333.1611.02 ─ 04
Parameters:
<Yposition> Mask offset from the vertical center
Default unit: div
MASK:YSCale <Yscale>
Changes the vertical scaling to stretch or compress the mask in y-direction.
Parameters:
<Yscale> A value over 100% stretches the amplitudes; a value less than
100% compresses the amplitudes.
Default unit: %
MASK:XWIDth
<Xaddition>
Changes the width of the mask in horizontal direction.
Parameters:
<Xaddition> The value is added to the positive x-values and subtracted from
the negative x-values of the mask limits in relation to the mask
center.
Default unit: div
MASK:YWIDth <Yaddition>
Changes the width of the mask in vertical direction.
Parameters:
<Yaddition> The value is added to the y-values of the upper mask limit and
subtracted from the y-values of the lower mask limit.
Default unit: div
MASK:SAVE <Filename>
Saves the current mask in the specified file.
Setting parameters:
<Filename> String parameter
Path and file name
Usage: Setting only
MASK:LOAD <Filename>
Loads a stored mask from the specified file.
Setting parameters:
<Filename> String parameter
Path and file name
Applications