Rohde & Schwarz R&S RTB2004 - Page 336

Remote Control Commands
R&S
®
RTB2000
328User Manual 1333.1611.02 ─ 04
SPECtrum:FREQuency:MAGNitude:SCALe......................................................................329
SPECtrum:FREQuency:AVERage:COMPlete?..................................................................329
SPECtrum:FREQuency:AVERage:COUNt........................................................................330
SPECtrum:FREQuency:POSition.....................................................................................330
SPECtrum:FREQuency:RESet........................................................................................ 330
SPECtrum:FREQuency:SCALe....................................................................................... 330
SPECtrum[:STATe]
Switches on the spectrum analysis.
Parameters:
<State> ON | OFF
SPECtrum:SOURce
Selects the source for the spectrum analysis diagrams.
Parameters:
<Source> CH1 | CH2 | CH3 | CH4
SPECtrum:FREQuency:WINDow:TYPE
Window functions are multiplied with the input values and thus can improve the spec-
trum analysis display.
Applications