Remote Control Commands
R&S
®
RTB2000
357User Manual 1333.1611.02 ─ 04
Example:
MMEM:COPY "/INT/SETTINGS/SET001.SET",
"/USB_FRONT/SETTINGS/TESTSET1.SET"
Example: Chapter 15.2.1.2, "Saving, Copying, and Loading Setup Data",
on page 242
Usage: Setting only
MMEMory:MOVE <FileSource>,<FileDestination>
Moves an existing file to a new location.
Setting parameters:
<FileSource> String parameter
Path and name of the file to be moved
<FileDestination> String parameter
Path and name of the new file
Example:
MMEM:MOVE "/INT/SETTINGS/SET001.SET",
"/USB_FRONT/SETTINGS/SET001.SET"
Usage: Setting only
MMEMory:DELete <FileSource>
Removes a file from the specified directory.
Setting parameters:
<FileSource> String parameter
File name and path of the file to be removed. If the path is omit-
ted, the specified file will be deleted in the current directory. Fil-
ters are not allowed.
Example: Chapter 15.2.1.2, "Saving, Copying, and Loading Setup Data",
on page 242
Usage: Setting only
MMEMory:DATA <FileName>,<Data>
Writes data to the specified file in the current directory MMEMory:CDIRectory, or
reads the data.
Parameters:
<Data> 488.2 block data
The block begins with character '#'. The next digit is the length of
the length information, followed by this given number of digits
providing the number of bytes in the binary data attached.
Parameters for setting and query:
<FileName> String parameter containing the file name
Documenting Results
To Next Page
Loading...
