Rohde & Schwarz R&S RTB2004 - Page 366

Remote Control Commands
R&S
®
RTB2000
358User Manual 1333.1611.02 ─ 04
Example:
MMEM:DATA "abc.txt", #216This is the file
#2: the length infomation has two digits
16: the binary data has 16 bytes.
MMEM:DATA? "abc.txt"
received: This is the file
Example: Chapter 15.2.1.2, "Saving, Copying, and Loading Setup Data",
on page 242
MMEMory:STORe:STATe <StateNumber>,<FileName>
Saves the current device settings to the specified file in the current directory.
Setting parameters:
<StateNumber> Range: 1 to 1
Increment: 0
*RST: 1
<FileName> String parameter
File name, with or without file extension
Example:
MMEM:CDIR "/USB_FRONT/DATA"'
MMEM:STOR:STAT 1,"MORNING.SET"
Example: Chapter 15.2.1.2, "Saving, Copying, and Loading Setup Data",
on page 242
Usage: Setting only
MMEMory:LOAD:STATe <StateNumber>,<FileName>
Loads the device settings from the specified file in the current directory.
Setting parameters:
<StateNumber> Range: 1 to 1
Increment: 0
*RST: 1
<FileName> String parameter
File name, with or without file extension
Example:
MMEM:CDIR "/USB_FRONT/DATA"'
MMEM:LOAD:STAT 1,"MORNING"
Example: see Chapter 15.2.1.2, "Saving, Copying, and Loading Setup
Data", on page 242
Usage: Setting only
Documenting Results