Remote Control Commands
R&S
®
RTB2000
366User Manual 1333.1611.02 ─ 04
Return values:
<Error> Error/event_number,"Error/event_description>[;Device-depend-
ent info]"
Example:
0,"No error"
Usage: Query only
SCPI confirmed
SYSTem:ERRor:ALL?
Returns a list of all error/event numbers and their description, and removes it from the
error/event queue.
Return values:
<ErrorList> List of ErrorFormat
List of: Error/event_number,"Error/event_description>[;Device-
dependent info]"
If the queue is empty, the response is 0,"No error"
Usage: Query only
SCPI confirmed
SYSTem:PRESet
Resets the instrument to the default state, has the same effect as *RST.
Usage:
Event
SYSTem:EDUCation:PRESet
Deletes the password of the education mode.
Usage:
Event
SYSTem:DFPRint?
Returns the device footprint of the instrument. The device footprint contains the config-
uration of the instrument, installed modules, installed software and software licenses.
This information is written in the device footprint xml file might be useful in case of
maintenance or support request.
Return values:
<DeviceFootprint> Block Data
Information as block data.
Usage: Query only
SYSTem:TREE?
REturns a list of the implemented remote commands.
General Instrument Setup
To Next Page
Loading...
