Rohde & Schwarz R&S RTB2004 - Page 387

Remote Control Commands
R&S
®
RTB2000
379User Manual 1333.1611.02 ─ 04
Example:
TRIG:A:SPI:PATT "0011XXXX0110"
TRIG:A:SPI:PLEN?
12
TRIG:A:SPI:PLEN 4
TRIG:A:SPI:PATT?
"0011"
TRIGger:A:SPI:POFFset <PatternBitOffset>
Sets the number of bits before the first bit of the pattern.
Parameters:
<PatternBitOffset> Number of ignored bits
Range: 0 to 4095
Increment: 1
*RST: 0
15.11.2.4 SPI and SSPI - Decode Results
In all BUS<b>:SPI... and BUS<b>:SSPI... commands, the suffix <b> selects the
bus.
BUS<b>:SPI:FCOunt?....................................................................................................379
BUS<b>:SPI:FRAME<n>:STATus?..................................................................................379
BUS<b>:SPI:FRAME<n>:STARt?....................................................................................380
BUS<b>:SPI:FRAME<n>:STOP?.....................................................................................380
BUS<b>:SPI:FRAME<n>:DATA:MOSI?............................................................................380
BUS<b>:SPI:FRAME<n>:DATA:MISO?............................................................................381
BUS<b>:SPI:FRAME<n>:WCOunt?.................................................................................381
BUS<b>:SPI:FRAME<n>:WORD<o>:STARt?................................................................... 381
BUS<b>:SPI:FRAME<n>:WORD<o>:STOP?....................................................................382
BUS<b>:SPI:FRAME<n>:WORD<o>:MOSI?.................................................................... 382
BUS<b>:SPI:FRAME<n>:WORD<o>:MISO?.................................................................... 382
BUS<b>:SPI:FCOunt?
Returns the number of decoded frames.
Suffix:
<b>
.
1 | 2
Return values:
<FrameCount> Total number of decoded frames.
Usage: Query only
BUS<b>:SPI:FRAME<n>:STATus?
Returns the overall state of the specified frame.
Serial Bus Analysis