Rohde & Schwarz R&S RTB2004 - Page 441

Remote Control Commands
R&S
®
RTB2000
433User Manual 1333.1611.02 ─ 04
Parameters:
<Size> Specifies the number of divisions per logic channel.
Range: 0.2 to 8
Increment: 0.1
*RST: 0.3
Default unit: DIV
DIGital<m>:POSition <Position>
Sets the vertical position of the indicated vertical channel.
Suffix:
<m>
.
0..15
Number of the logic channel
Parameters:
<Position> Vertical position in divisions
Default unit: DIV
DIGital<m>:LABel <Label>
Defines a label for the indicated logic channel.
Suffix:
<m>
.
0..15
Number of the logic channel
Parameters:
<Label> String value
String parameter
Example:
DIGital4:LABel "Data"
Defines the label "Data" for logic channel D4.
DIGital<m>:LABel:STATe <State>
Displays or hides the label of the indicated logic channel.
Suffix:
<m>
.
0..15
Number of the logic channel
Parameters:
<State> ON | OFF
*RST: OFF
LOGic<p>:STATe
Switches the logic pod on or off.
Mixed Signal Option (Option R&S
RTB-B1)