Rohde & Schwarz RTM2032 - Page 305

Remote Control
R&S
®
RTM20xx
290User Manual 1317.4726.02 ─ 01
Parameters:
<Range> Voltage range value
Range: 8,00E-003 to 80; without probe attenuation
*RST: 4,00E-002
Default unit: V
CHANnel<m>:POSition <Position>
Sets the vertical position of the indicated channel and its horizontal axis in the window.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Parameters:
<Position> Position value, given in divisions.
Range: -5 to 5
*RST: 0
Default unit: div
CHANnel<m>:OFFSet <Offset>
The offset voltage is subtracted to correct an offset-affected signal.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Parameters:
<Offset> Offset value
Range: Values depend on vertical scale and probe attenua-
tion.
Increment: Value depends on vertical scale and probe attenua-
tion.
Default unit: V
CHANnel<m>:BANDwidth <BandwidthLimit>
Selects the bandwidth limit for the indicated channel.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Command Reference