Rohde & Schwarz RTM2032 - Page 315

Remote Control
R&S
®
RTM20xx
300User Manual 1317.4726.02 ─ 01
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Return values:
<Type> NONE | ACTive | PASSive
NONE
not detected
ACTive
active probe
PASSive
passive probe
Usage: Query only
PROBe<m>:
SETup:UOFFset <UserOffset>
Sets an additional probe offset.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Parameters:
<UserOffset> Range: Depends on the probe characteristics.
*RST: 0
Default unit: V
PROBe<m>:ID:BUILd?
Queries the build number of the probe software.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Return values:
<BuildNumber> 32 bit number
Range: 0 to 4294967295
Increment: 1
Usage: Query only
PROBe<m>:ID:PARTnumber?
Queries the R&S part number of the probe.
Suffix:
<m>
.
Selects the input channel. The number of channels depends on
the instrument.
Command Reference