Rohde & Schwarz RTM2032 - Page 358

Remote Control
R&S
®
RTM20xx
343User Manual 1317.4726.02 ─ 01
Firmware/Software: FW 03.700
MEASurement<m>:STATistics:RESet
Deletes the statistical results for the selected measurement, and starts a new statistical
evaluation if the acquisition is running. The waveform count is set to 0 and all measure-
ment values are set to NAN.
Suffix:
<m>
.
1..4
Selects the measurement place.
Usage: Event
Firmware/Software: FW 03.700
MEASurement<m>:
RESult:AVG? <AverageValue>
Returns the average value of the current mesurement series.
The number of waveforms used for calculation is defined with MEASurement<m>:
STATistics:WEIGht.
Suffix:
<m>
.
1..4
Selects the measurement place.
Query parameters:
<AverageValue> Statistic value
Usage: Query only
Firmware/Software: FW 03.700
MEASurement<m>:RESult:STDDev? <StandardDeviation>
Returns the statistical standard deviation of the current mesurement series.
The number of waveforms used for calculation is defined with MEASurement<m>:
STATistics:WEIGht.
Suffix:
<m>
.
1..4
Selects the measurement place.
Query parameters:
<StandardDeviation> Statistic value
Usage: Query only
Firmware/Software: FW 03.700
Command Reference