Rohde & Schwarz RTM2032 - Page 443

Remote Control
R&S
®
RTM20xx
428User Manual 1317.4726.02 ─ 01
<n> *
Selects the frame (1...n).
Return values:
<StopTime> Range: depends on sample rate, record length, and time
base
Increment: depends on the time base
Default unit: s
Usage: Query only
BUS<b>:LIN:FRAMe<n>:CSSTate?
Returns the checksum state of the specified frame.
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Selects the frame (1...n).
Return values:
<ChecksumState> OK | ERR | UNDF
ERR: error
UNDF: undefined
Usage: Query only
BUS<b>:LIN:FRAMe<n>:CSValue?
Returns the checksum value.
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Selects the frame (1...n).
Return values:
<ChecksumValue> Decimal value
Usage: Query only
BUS<b>:LIN:FRAMe<n>:IDPValue?
Returns the parity value.
Suffix:
<b>
.
1..4
Selects the bus.
Command Reference