Rohde & Schwarz RTM2032 - Page 442

Remote Control
R&S
®
RTM20xx
427User Manual 1317.4726.02 ─ 01
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Selects the frame (1...n).
Return values:
<FrameData> Comma-separated list of decimal values of the data bytes.
Usage: Query only
BUS<b>:
LIN:FRAMe<n>:STATus?
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Return values:
<FrameStatus> OK | UART | CHCKsum | PRERror | SYERror | WAKeup |
INSufficient | ERR | LENer
Usage: Query only
BUS<b>:LIN:FRAMe<n>:STARt?
Returns the start time of the specified frame.
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Selects the frame (1...n).
Return values:
<StartTime> Range: depends on sample rate, record length, and time
base
Increment: depends on the time base
Default unit: s
Usage: Query only
BUS<b>:LIN:FRAMe<n>:STOP?
Returns the end time of the specified frame.
Suffix:
<b>
.
1..4
Selects the bus.
Command Reference