Rohde & Schwarz SMC100A - Page 159

Instrument Function
R&S
®
SMC100A
144Operating Manual 1411.4060.32 ─ 09
Extension - User Correction
Selects the file extension of the ASCII file to be imported or exported. Selection "TXT"
(text file) or "CSV" (Excel file) is available.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 283
Decimal Point - User Correction
Selects the decimal separator used in the ASCII data between '.' (decimal point) and ','
(comma) with floating-point numerals.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 285
Column Separator- User Correction
Selects the separator between the frequency and level column of the ASCII table the
user correction list is exported to or imported from.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 284
Select ASCII Source / Destination - User Correction
Calls the "File Manager" for selecting the ASCII file to be imported into a user correc-
tion list (source) or the ASCII file the user correction list is exported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SELect on page 284
Destination / Source - User Correction
Calls the "File Manager" for selecting the user correction list to be exported (source)
into an ASCII file or the destination for the ASCII file to be imported (destination) in.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:SELect on page 286
Import / Export - User Correction
Starts the export or import of the selected file.
When import is selected, the ASCII file is imported as user correction list.
When export is selected, the user correction list is exported into the selected ASCII file.
Remote command:
[:SOURce<hw>]:CORRection:DEXChange:EXECute on page 285
Filling the Correction List automatically
The "Fill Table" menu enables you to automatically set the level correction values.
RF Block