Rowe Scan 850i - Page 79

 Larger (roll empty: fit): If a fitting medium format is inserted but empty, the
printer does not print, but requires the respecting roll format. Otherwise
the printer prints to a larger format available next.
 Larger (medium defined: fit): If a fitting medium is defined but not inserted,
the printer does not print, but requires the respecting roll format.
Otherwise the printer prints to a larger format available next.
3. Folding machine: Response to missing folding machine
 Default: Use standard response of respective printer where the folding
machine is and/or should be located.
 Ignore: The printer prints without folding.
4. Tab: Response to missing tab if a folding program with tab is selected.
 Fit: The printer does not print the job and instead requires a (new) tab roll
giving a message.
 Ignore: The folding program is effected without applying a tab.
5. Output bin/runout: Response to full output tray of sorter and/or output bin of
printer (top or back).
 Default: Use standard response of respective printer where the sorter is
and/or should be located.
 Fit: Printer does not print the job and requires discharging of the output bin
instead by giving a message.
 Ignore: Printer prints the job on the next free output bin.
Figure 7.50: Info texts
Info texts: Here, you can enter additional information on a print job. This information
helps to identify the job in the job list.
The info texts are provided for future extensions and do not yet have any
function (also see Chapter 8.9).