Need help?Do you have a question about the RSscan footscan and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Type | Pressure Measurement System |
| Sampling Frequency | Up to 500 Hz |
| Measurement Area | Varies by model |
| Pressure Range | 0-100 N/cm² |
| Software Compatibility | footscan software |
| Application | Gait analysis |
| Output | Pressure maps, force-time curves, gait parameters |
| Sensor Technology | Capacitive Sensors |
Provides crucial safety instructions for using the footscan system.
Outlines essential pre-measurement safety checks for the device and environment.
Recommends yearly calibration and outlines repair procedures.
Specifies hardware and software requirements for optimal performance.
Guides through the process of installing the footscan system hardware and software.
Lists necessary conditions before proceeding with installation.
Step-by-step guide for connecting the USB cable to the plate.
Instructions for connecting the interface box and its power supply.
Guides through the software installation process.
Guides the user through performing their first measurement with the system.
Details the process of performing a weight calibration for accurate measurements.
Guides on adding new client data to the database.
Explains how to set up and perform new measurements.
Provides solutions for common issues encountered during installation and operation.
Addresses issues related to device licensing and authorization.
Provides solutions for installation failures related to Windows updates.
Addresses driver issues specific to Windows 7 systems.
Solutions for errors related to missing C++ redistributable packages.
Troubleshooting steps for USB connection issues with the device.
Details the functions accessible from the main application's Home Screen.
Initiate the weight calibration process for the device.
Access the Settings dialog to customize application preferences.
Display license information and connected hardware status.
Lists all clients stored in the footscan database and provides management options.
Create a new measurement session for a selected client.
Displays client information and lists all recorded measurement sessions.
Guides the user through the process of creating a new measurement session.
Enter client details, session name, and select measurement types.
Capture a 3D representation of the client's feet.
Provides tools for analyzing measurement sessions and comparing data.
Analysis of the 3D scanned left and/or right foot.
Displays relative force distribution of static measurements.
Evaluates pressure distribution and COP displacement in balance measurements.
Replays foot roll-offs for the selected foot pair in 2D.
Shows the selected foot as a height map, proportionate to pressure value.
Displays total impulse applied on each sensor of the foot selection.
Provides information about the risk of feet in dynamic measurements.
Compares selected foot's gait ratios with averages for calculations.
Guides through designing custom orthotic supports using D3D analysis.
Guides through designing custom orthotic supports using Phits analysis.
A step-by-step wizard to guide the migration process from older versions.
Selects the migration type: full migration, database import, or plate upgrade.
To Next Page