Products Overview
In general, all footscan systems operate in the same manner:
T h e footscan plate measures plantar pressure
using an X-Y matrix of resistive pressure sensitive
sensors that are scanned sequentially. The system
registers pressure data when the subject stands on
or walks over the plate.
The footscan 9 software processes the data. The
result is a pressure image of the foot. The color
scale of the image varies from blue (minimum
pressure) to red (maximum pressure). Additionally,
the system computes a number of physical
properties for further analysis of the measurement.
Footscan Entry level systems are available in three sizes: 0.5m, 1m and 1.5m. The
plates connect directly to a USB2 port of the computer via the fixed (0.5m and 1m
system) or detachable USB cable (1m heavy duty and 1.5m system). No additional
power supply unit is required. Appendix 18 provides more technical details.
0.5m entry level
system
1m entry level system 1.5m entry level system
1m entry level heavy duty system
Footscan interface box systems also come in three sizes: 0.5m, 1m and 2m. They
consist of a footscan interface box and a plate, as well as the cables to connect them:
®
®
®
®
®
®
To Next Page
Loading...