Once a footscan 7 pressure plate is converted to work with footscan 9, it
can no longer be used with your old footscan 7 software!
It is necessary to properly calibrate your device to obtain correct
measurement values. If the calibration procedure as described in the
footscan 7 manual, was not regularly performed, the absolute pressure
values of the footscan 7 data converted to footscan 9 will be wrong. New
measurements made with footscan 9 will have correct measurement values,
but existing footscan 7 measurements which are imported into footscan 9
will retain their original measurement values, even if they were wrong due to
bad calibration.
® ®
®
®
® ®
®
® ®
To Next Page
Loading...