Chapter 3. Installing Product 3 – 25
3.6.6.2. Preview
⑩
Task List: Provide a task list which belongs to the protocol selected from the protocol list.
■ EzExam+ Creator
[Figure 3.15 Setup – System – EzExam+ Creator]
①
Options in Function Window
– New: Create a new protocol.
– Open: Load an existing protocol.
– Save: Save the current protocol. It is activated at any time even when there is no
change of data.
– Save As: Save the current protocol with a different name.
– Undo/Redo: Undo the last performed function, or restores the last undone function.
(Up to 50 Undo/Redo actions can be done; this function will be inactive if it cannot be
performed.)
– Format Painter: Applies the format settings from one protocol to another.
To Next Page
Loading...