Chapter 3. Installing Product 3 – 7
3.3. Installation Environment
3.3.1. Caution
When installing the product, please pay attention to the following: For more information on use
and setup, please refer to the accompanying manual for this product.
Placing the system near generators, X
-ray machines, or broadcast cables may
result in screen noise and abnormal visual images.
Sharing the power source with other electrical devices may also produce noise.
• Optimal conditions for the system are a temperature of 10-35° and a humidity of 30-75%.
• Avoid excess humidity.
• Avoid direct sunlight.
• Avoid excessive fluctuations in temperature.
• Avoid installing the product near a heating appliance.
• Avoid dusty and/or poorly ventilated locations.
• Avoid locations that are subject to vibration.
• Avoid locations where chemical substances or harmful gases are present.
To Next Page
Loading...