Chapter 3. Installing Product 3 – 3
3.1. Transporting
This product is a finely tuned piece of medical electronic equipment; careful attention is required
when transporting it.
3.1.1. Precautions During Transport
This product and its packaging are designed to protect the product from physical impacts.
However, drops and external impacts may cause serious damage to the product.
• Before transporting the product, check that the wheel brakes are unlocked.
Also, be sure to retract the monitor arm completely so that it is secured in a stationary
position.
• Always use the handles at the back of the console and move the product slowly.
3.1.2. Brakes
You can use the brakes to control the movement of the product. The brake pedal is located at
the center of the console pedal and when pressed brakes all the wheels simultaneously. To lock
the brakes, press the front part of the brake pedal with your foot. To unlock the brakes, press the
back of the pedal.
We recommend that you lock the brakes when using the product.
3.1.3. Precautions on Ramps
Always make sure that the control panel is facing the direction of movement. If you leave the
product on an incline, the product may fall over even if the brakes are engaged. Do not rest the
product on a ramp.
The product weighs more than 100 kg. Be extra careful when transporting it.
Careless transportation of the product may result in product damage or personal
injury.
Be especially aware of the castors when moving the system.
ommends that you practice transporting the product up or
down ramps in advance of any significant relocation.
To Next Page
Loading...