4 – 6 HS40 Service Manual
■ 3D/4D Mode
1. Check whether loading is performed correctly when you proceed with Free Hand 3D
SCAN and when you skip to Freeze; check for broken images and noise while you are
proceeding.
2. Check whether loading is performed correctly when you proceed with Static 3D Scan and
check for broken images and noise while you are proceeding. Check the probe for noise
and check whether the probe’s motor works normally.
3. Check whether loading is performed correctly when you proceed with Live 3D Scan and
check for broken images and noise while you are proceeding. Check the probe for noise
and check whether the motor works normally.
4. Check for errors in ROI 3D, ABC 3D, and Full images.
5. Check whether the 3D image changes to the selected angle.
6. Check whether the 3D image’s contrast changes to the selected value.
7. Check for errors in the image when you change the size of the image.
8. Check the Display Format Image (ACB, Volume CT Image).
9. Step Angle, Rotation Angle, Rot. Select Axis and then proceed with Cine; check whether
Cine Loading works in accordance with the set items and check for breaks and errors in
the image.
To Next Page