Using special print features
107
5. Printing
16
Printing on both sides of the paper
You can print on both sides of a paper; duplex. Before printing, decide how you
want your document oriented.
• By default, the duplex feature is enabled and the binding option is set to
Long Edge.
• Do not print on both sides of the special media, such as labels,
envelopes, or thick paper to print on both sides of paper. It may cause a
paper jam or damage the machine.
1
To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on page 96).
2
Click the Basic tab.
3
From the Double-Sided Printing section, select the binding option you
want.
• Printer Default: If you select this option, this feature is determined
by the setting you’ve made on the control panel of the machine. This
option is available only when you use the PCL printer driver.
• None: Disables this feature.
• Long Edge: This option is the conventional layout used in
bookbinding.
• Short Edge: This option is the conventional layout used in calendars.
4
Click the Paper tab, select the Original size, Source, and Type.
5
Click OK or Print until you exit the Print window.
To Next Page
Loading...
Need help?
General