Using special print features
108
5. Printing
17
Change the size by percentage of your document
You can change the size of a document to appear larger or smaller on the
printed page by typing in a percentage you want.
1
To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on page 96).
2
Click the Paper tab.
3
Select actual paper size of the originals from the Original Size.
4
Enter the scaling rate in the Percentage input box.
You can also click the up/down arrows to select the scaling rate.
You cannot use this feature when you select a size of paper from the Output
Size.
5
Select the Source and Type.
6
Click OK or Print until you exit the Print window.
18
Fitting your document to a selected paper size
This printer feature allows you to scale your print job to any selected paper size
regardless of the document size. This option can be useful when you want to
check fine details on a small document.
1
To change the print settings from your software application, access
Printing Preferences (see "Opening printing preferences" on page 96).
2
Click the Paper tab.
3
Select actual paper size of the originals from the Original Size.
4
Select the size of paper to be printed in the tray from the Output Size.
5
Select the Source and Type.
6
Click OK or Print until you exit the Print window.
To Next Page
Loading...
Need help?
General