Changing the scan feature settings
163
7. Scanning
Resolution
You can adjust document resolution.
Press the resolution and choose the values. The higher
value you select, the clearer the result, but the scanning
time may take longer.
Color Mode
You can select the color options of scan outputs.
• Color: Uses color to display an image: 24 bits per
pixel, 8 bits for each RGB, is used for 1 pixel.
• Gray: Uses the black gradation to display an image:
8 bits per pixel.
• Mono: Displays an image in black and white. 1 bit
per pixel.
Item Description
Duplex
• 1 Sided: For originals that are scanned on one side
only.
• 2 Sided, Book: For originals that are scanned on
both sides.
• 2 Sided, Calendar: For originals that are scanned on
both sides, but the back is rotated 180 degrees.
If an original is placed on the scanner glass, the
machine shows the window asking to place
another page. Load another original and press
Yes. When you finish, select No for this option.
Darkness Adjusts the brightness level to scan.
Filing Policy
This option is available When USB memory is inserted
into the USB memory port on your machine.
You can choose the policy for generating file names
before you proceed with the scan job through the USB
memory device. If the USB memory device already has
the same name entered, you can rename or overwrite it.
• Change Name: If the USB memory device already
has the same name when you enter a new file name,
the file will be saved as a different file name that is
automatically generated.
• Cancel: Does not send the scanned file if a file with
same name is already on the server.
• Overwrite: The sent file overwrites the existing file.
Item Description
To Next Page
Loading...
Need help?
General