Sending a fax
179
8. Faxing (Optional)
9
Sending a fax using speed dial numbers
When you are prompted to enter a destination number while sending a fax,
enter the speed dial number you set previously (see "Setting up an Address
Book" on page 193).
1
Place the originals face up in the RADF or place a single original face
down on the scanner glass and close the RADF (see "Loading originals"
on page 72).
2
Press Fax from the display screen.
3
Adjust the document settings in the Advanced or Image tab (see
"Adjusting the document settings" on page 187).
4
Press the Basic tab.
5
Select Resolution.
6
When you press the input line from display screen:
• For a one-digit (0-9) speed dial number, press and hold the
corresponding digit button using the numeric keypad on the control
panel.
• For a two- or three-digit speed dial number, press the first digit
button(s) and then hold down the last digit button using the
numeric keypad on the control panel.
7
Press (Start) on the control panel.
The machine starts to scan and send a fax to the destination.
To Next Page
Loading...
Need help?
General