Setting up an address book from SyncThru™ Web Service
203
9. Setting up an Address Book
If you do not want to add individual addresses to the group address you made, skip
this step. You can add individual addresses next time by pressing
Group Details
.
10
Click Apply.
11
Check the addresses you want to add to Group Address Book from
Individual Address Book.
12
Click the arrow in the middle. The selected addresses are added to
Group Address Book.
13
Click Apply.
Editing Group addresses in Groups Address Book
1
Turn your networked computer on and open a web browser.
2
Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3
Press Enter or click Go to access the SyncThru™ Web Service shows.
4
Click Login.
5
Enter your ID and password to log in to the machine.
6
Click Address Book > Group.
7
Check the group address you want to edit and press Edit Group.
8
Change the group address information.
9
Click Apply.
Press Undo to delete the information you entered. If you press Cancel, the
Edit window closes.
Deleting Group addresses in a Groups Address Book
1
Turn your networked computer on and open a web browser.
2
Enter your machine’s IP address as the URL in a browser.
(Example, http://123.123.123.123)
3
Press Enter or click Go to access SyncThru™ Web Service.
4
Click Login.
5
Enter your ID and password to log in to the machine.
6
Click Address Book > Group.
7
Check the group addresses you want to delete.
8
Click Delete Group.
Click OK when the confirmation window appears.
To Next Page
Loading...
