Machine setup
249
12. Menu Overview and Advanced Features
Redial You can set the machine to re-dial the fax
number if the recipient’s fax machine is busy
or not answering. You can set the number of
re-dial attempts and the interval between
attempts.
• Redial Term: Select the terms for re-
dialing using the +/- button.
• Redial Times: Select the re-dial time using
the +/- button. Selecting 0 for Redial
Times means that the machine will not re-
dial.
Prefix Dial You can set the number to be dialed before a
number is dialed. Users may set this to access
a PABX (e.g., 9) or area code (e.g., 02). Once
this number is set, it will automatically appear
on the screen when entering a phone/fax
number.
ECM Mode You can set the machine to correct the error. It
helps with poor line quality and ensures any
faxes you send are properly transmitted to
any other error correction mode-equipped
fax machines. Sending a fax using error
correction mode may take more time.
Option Description
Receive Mode You can set Receive Mode and Dial Type
options.
•
Receive Mode:
Select to change the fax
receiving mode.
-
Telephone:
Receives a fax by
pressing
Fax
>
On Hook
and then
(
Start
)
.
-
Fax:
Answers an incoming fax call and
immediately goes into the fax reception
mode.
-
Answering Machine/Fax:
Is for when an
answering machine is attached to your
machine. Your machine answers an
incoming call, and the caller can leave a
message on the answering machine. If the
fax machine senses a fax tone on the line,
the machine automatically switches to
Fax
mode to receive the fax.
Option Description
To Next Page
Loading...
Need help?
General