Samsung Multifunction MultiXpress X322 Series - Page 366

Understanding display messages
366
15. Troubleshooting
13
Misc. messages
Video System Failure:
[error number]. Turn off
then on
There is a problem in the
CPU.
Turn the machine off
and back on again. If
the problem persists,
call for service.
Wi-Fi Direct is not ready.
Turn off then on. Call for
service if the problem
persists
The machine failed to
initialize the Wi-Fi Direct
connection.
Reboot the machine to
initialize the wireless
settings. If the problem
persists, please call for
service.
Wireless security settings
are incorrect. Please
change the settings
• The wireless network
options are
configured incorrectly
for the security
method.
• The password entered
in the wireless
security options is
incorrect.
• The machine does not
support the security
method used by the
access point or
wireless router.
• The access point or
wireless router has
malfunctioned.
Reconfigure the
wireless options in the
machine, SWS, access
point, or wireless
router. The WPA2-PSK/
AES security method is
recommended. If the
problem persists,
please call for service.
Message Meaning Suggested solutions
Message Meaning Suggested solutions
• [color] Developer
Failure: [error
number]. Turn off then
on
• [color] Developer
Failure: [error
number]. Turn off then
on. Please call for
service if the problem
persists
There is a problem in the
developer.
Unplug the power cord
and plug it back in. If
the problem persists,
call for service.
[color] imaging unit is not
compatible. Check users
guide
The imaging unit you
have installed is not for
your machine.
Install a Samsung-
genuine imaging unit,
designed for your
machine (see
"Available supplies" on
page 289).
• [color] imaging unit is
not installed. Install it
• Imaging unit is not
installed. Install the
unit
The imaging unit is not
installed or the imaging
unit is not properly
installed.
Install the imaging unit.
If it is already installed,
try to reinstall the
imaging unit. If the
problem persists, call
for service.