EasyManuals Logo

Samsung Multifunction MultiXpress X322 Series User Manual

Samsung Multifunction MultiXpress X322 Series
432 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #380 background imageLoading...
Page #380 background image
Solving other problems
380
15. Troubleshooting
Color or Black
background
If the amount of background shading becomes unacceptable:
Change the image transfer belt if it has reached its lifespan.
Contact a service representative.
Check the environmental conditions: very dry conditions
(low humidity) or a high level of humidity (higher than 80%
RH) can increase the amount of background shading.
Remove the old toner cartridge and install a new one.
Toner smear If toner smears on the page:
Clean the inside of the machine. Cleaning the inside or
contact a service representative.
Check the paper type and quality (see "Print media
specifications" on page 393).
Remove the imaging unit and install a new one. Contact a
service representative.
Change the image transfer belt if it has reached its lifespan.
Contact a service representative.
Condition Suggested Solutions
Vertical
repetitive
defects
If marks repeatedly appear on the printed side of the page at
even intervals:
The imaging unit may be damaged. If a repetitive mark
occurs on the page, run a cleaning sheet through several
times to clean the imaging unit. Cleaning the inside. If you
still have the same problems, remove the imaging unit and
install a new one. Contact a service representative.
Parts of the machine may have toner on them. If the
defects occur on the back of the page, the problem will
likely correct itself after a few more pages.
The fusing assembly may be damaged. Contact a service
representative.
Background
scatter
Background scatter results from bits of toner randomly
distributed on the printed page.
The paper may be too damp. Try printing with a different
batch of paper. Do not open packages of paper until
necessary so that the paper does not absorb too much
moisture.
If background scatter occurs on an envelope, change the
printing layout to avoid printing over areas that have
overlapping seams on the reverse side. Printing on seams
can cause problems.
If background scatter covers the entire surface area of a
printed page, adjust the print resolution through your
software application or in Printing Preferences (see
"Opening printing preferences" on page 96).
Condition Suggested Solutions

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Samsung Multifunction MultiXpress X322 Series and is the answer not in the manual?

Samsung Multifunction MultiXpress X322 Series Specifications

General IconGeneral
BrandSamsung
ModelMultifunction MultiXpress X322 Series
CategoryPrinter
LanguageEnglish

Related product manuals