Confidential
Chapter 3 Connecting Cables
RF4402d Series Installation Manual v1.0 84
Copyright © 2018, All Rights Reserved.
2
Install an AC power cable from the AC distributor to the AC/DC convertor.
Figure 72. Connecting AC/DC convertor AC Power Cable (1)
3
Insert the connector aligning the cable side connector’s white dot and system
side connector’s white dot. When inserting the connector, push the shell to
upper side.
Figure 73. Connecting AC/DC convertor AC Power Cable (2)
System side connector’s white dot
Cable side connector’s white dot
Shell
Push
1
2
[Bottom View]
AC Distributor
AC Power Cable
To Next Page
Loading...