Sartorius Cubis MCE - Page 27

Operating Instructions Cubis
®
MCE 27
Operating Concept
Level 1 Level 2 Level 3 Description
DATA.OUTP.
“Data
output”
PRNT.PARA.
Printout and PC
direct transfer
settings
ACTIVATE
“Triggers”
Define whether the printout or PC direct data
output takes place with or without balance stability.
FORMAT Define the format for the printout (characters per line).
PRT.INIT.
“Initializing”
Define the settings for printer initialization.
GLP Define the settings for the GLP printout.
TAR./PRT.
“Tare / print”
Activate | deactivate automatic taring after every
print process.
TIME Define the time format.
DATE Define the date display format.
PC.DIRECT
Direct transfer of
data (PC)
DEC.SEPAR. Define the decimal separator character.
OUTP.FORM. Define the output format for the data exchange
between the balance and the PC.
APPLIC.
“Applications”
WEIGH
(Factory setting)
UNIT Activate | deactivate the “Toggle between weight
units” function for all applications.
COUNT RESOLUT. Define the resolution of the weight value for the
“Counting” application.
REF.UPDT.
“Reference updating”
Activate | deactivate automatic reference updating
for the “Counting” application.
PERCENT
“Weighing in
percent”
DEC.PLCS
“Decimal places”
Define the number of decimal places for the
“Weighing in percent” application.
NET-TOTL.
“Net-total”
COMP.PRT.
“Component
printout”
Activate | deactivate the component printout for
the “Net-total” application.
TOTAL
“Totalizing”
COMP.PRT.
“Component
printout”
Activate | deactivate the component printout for
the “Totalizing” application.
ANIMALW.
“Animal weighing”
ACTIVITY
“Animal activity”
Define the level of activity of the sample for the
“Animal weighing” application.
START Define the trigger for starting the animal weighing.
CALC.
“Calculation”
METHOD Define the method of calculation for the
“Calculation” application.
DEC.PLCS
“Decimal places”
Define the number of decimal places for the
“Calculation” application.
DENSITY
“Density
determination”
DEC.PLCS
“Decimal places”
Define the number of decimal places for the
“Density determination” application.
STATIST.
“Statistics”
COMP.PRT.
“Component
printout”
Activate | deactivate the component printout for
the “Statistics” application.