Operating Instructions Cubis
®
MCE 49
System Settings
Parameters Setting values Explanation
LEFT CMD. PRINT* Left command of the gesture control corresponds to the [Print] key.
ZERO Left command of the gesture control corresponds to the [Zero] key.
TARE Left command of the gesture control corresponds to the [Tare] key.
IONIZER Left command of the gesture control corresponds to the [Ionizer] key.
D.SHIELD Left command of the gesture control corresponds to the [Change] key.
OPEN LFT. Left command of the gesture control opens the left draft shield panel.
OPEN RT. Left command of the gesture control opens the right draft shield panel.
LEFT CMD. OPEN TOP Left command of the gesture control opens the upper draft shield panel.
CLOSE DS. Left command of the gesture control closes the entire draft shield.
NONE No function is assigned to the left command of the gesture control.
RIGHT.CMD. PRINT* Right command of the gesture control corresponds to the [Print] key.
ZERO Right command of the gesture control corresponds to the [Zero] key.
TARE Right command of the gesture control corresponds to the [Tare] key.
IONIZER Right command of the gesture control corresponds to the [Ionizer] key.
D.SHIELD Right command of the gesture control corresponds to the [Change] key.
OPEN LFT. Right command of the gesture control opens the left draft shield panel.
OPEN RT. Right command of the gesture control opens the right draft shield panel.
OPEN TOP Right command of the gesture control opens the upper draft shield panel.
CLOSE DS. Right command of the gesture control closes the entire draft shield.
NONE No function is assigned to the right command of the gesture control.
UP.CMD. PRINT* Upper command of the gesture control corresponds to the [Print] key.
ZERO Upper command of the gesture control corresponds to the [Zero] key.
TARE Upper command of the gesture control corresponds to the [Tare] key.
IONIZER Upper command of the gesture control corresponds to the [Ionizer] key.
D.SHIELD Upper command of the gesture control corresponds to the [Change] key.
OPEN LFT. Upper command of the gesture control opens the left draft shield panel.
OPEN RT. Upper command of the gesture control opens the right draft shield panel.
OPEN TOP Upper command of the gesture control opens the upper draft shield panel.
CLOSE DS. Upper command of the gesture control closes the entire draft shield.
NONE No function is assigned to the upper command of the gesture control.
* Factory setting
To Next Page
Loading...
