Sartorius Cubis Series User Manual

y The weighing result is displayed.
y It is also possible to see the weighing result on a graphic scale for a set target
range.
It can be seen immediately on the graphic scale if the result is outside
of the tolerance.
t To switch the display to check mode, select Check.
y The display will now show whether the weighing result has gone over upper
limit (HH) or under the lower limit (LL).
t To check additional objects, empty the weighing pan and place the next object
on it.
y The display is updated dynamically.
t You can toggle between weighing and checkweighing at any time by selecting
Weigh or Check.
Checkweighing
112 Cubis MSU User Manual

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model