Interfaces
132 Cubis MSU User Manual
Configuration Options for Printer Output Operating Mode
You can modify all settings for this operating mode depending on the configured
printer type.
– Printer type: YDP10-0CE/YDP20-0CE/YDP03-0CE/Universal/
YDP04IS-0CEUV
– Selected protocol: Hardware handshake
– Baud rate: 300 to 19200 baud (*9600)
– Data bits: 7 or *8
– Parity: None / *Odd / Even
– Stop bits: *1 or 2 stop bits
– Log data: *Turn off / Turn on
The following setting options are available for the printer types:
– YDP10-0CE: No setting option; all parameters are permanently defined
– YDP20-0CE: All can be configured except stop bits
– YDP03-0CE: All can be configured except data bits and stop bits
– Universal: All can be configured
– YDP04IS-0CEUV: No setting option; all parameters are permanently defined
– YDP10BT-0CE (for optional Bluetooth module only, ComC): No setting
option; all parameters are permanently defined
Configuration Options for SICS Operating Mode
You can change all settings for this operating mode.
– Selected protocol: No protocol /Software handshake XON; XOFF /
*Hardware handshake RTS; CTS
– Baud rate: 300 to 115200 Baud, *9600
– Data bits: 7 or *8
– Parity: None / *Odd / Even
– Stop bits: *1 or 2 stop bits
– Log data: *Turn off/Turn on
To Next Page
Loading...
