Analytical and precision balances:
1. Plug the DC power supply cable into the balance and tighten
the threaded fitting.
Semi-microbalances (MSx1225..., MSx125... models):
1. Plug the DC supply cable into the electronics module
and tighten the threaded fitting.
2. Plug the other end of the power cord into the AC adaptor.
3. Insert the AC adaptor plug into the wall outlet.
y The balance is now ready to use.
Safety Precautions
The output line of the adaptor has a terminal (GND) connected to the metal hous-
ing of the balance. The data port is also galvanically linked to the balance housing
(GND).
Cubis MSU User Manual 17
Getting Started
To Next Page
Loading...
