Sartorius Cubis Series User Manual

t Enter the range of instability for the start of the measurement:
0.1%, 0.2%, 0.5% ... *10% ... 50% from measured object
This entry estimates the strength of the instability that is caused by the activity
(e. g., animal movement). You can use the rough estimation or a more detailed
estimation using percentages.
The weight value changes with each movement of the weighing pan. As soon
as three consecutive measurement values are within the selected instability range,
the interval measurement begins.
Example: You are weighing animals with an average weight of approx. 300 g.
With the “5.0% of object” setting, the measurement starts when the movements
are within a range of 15 g, i.e., ± 7.5 g. With the “50% of object” setting, the
interval measurement would start when the weight value was within a range
of 150 g, i.e. ± 75 g.
t Define the number of measurements to be used for the average value.
Enter fixed number: You must now enter a fixed number.
*Number can be changed during process: You will define the number when
you execute the task.
Aktivität
Anzeigeschritte
Messung bei 5% ± 7,5 g
Start bei Mindestlast 100 Anzeigeschritte
Zeit
Messung bei 50% ±75 g
400
350
300
250
200
150
100
50
0
86 Cubis MSU User Manual
Averaging

Sartorius Cubis Series Specifications

General

Display	Color touch screen
Readability	0.01 mg to 1 g
Interfaces	USB, Ethernet, RS-232
Calibration	Internal and external
Housing	Die-cast aluminum
Response Time	Varies by model
Pan Size	Varies by model
Operating Temperature	10°C to 30°C
Compliance	GLP
Power Supply	100 – 240 V, 50/60 Hz
Capacity	Varies by model (up to 64 kg)
Repeatability	Varies by model
Linearity	Varies by model