Cubis MSU User Manual 87
Averaging
t Define whether or not the weighing results should be calculated with an addi-
tional factor and how this factor should be applied.
No factor
Enter fixed factor
: You must now enter this factor.
Factor can be changed during process: You must enter this factor when
you execute the task.
Example: Each animal should receive a food supplement of 50 mg per kg of body
weight. For this, the factor 0.05 can be entered (weight value in g/1000 g + 0.05 g).
During the measurement, both the weight value (animal weight, e.g., 285 g) as well
as the calculated value (amount of supplement, e.g., 14.25 mg) can be displayed.
If you chose to conduct the calculation:
t Define the number of decimal places to be used for the calculation.
none, 1, *2, ... 6 digits
t Define whether or not the end of the measurement (and if necessary the calcu-
lation) should have an acoustic signal.
*Result beep, off or Result beep, on
y An overview of all settings is displayed.
t Check all settings and change as required.
y A message asks whether you would like to add another application.
t If required, select additional applications to be combined.
y Now you will be prompted to configure the weighing and printing functions.
t Check all settings and change as required.
t Enter a short name and a description for the new task.
t To save the new task, select Save.
To Next Page
Loading...
Need help?
General
