Cubis MSU User Manual 89
Averaging
Executing a Task: Averaging with Automatic Start
D t If you haven’t already done so, go to Application Management.
y The task selection is displayed.
t Select the desired task.
or
t If the desired task is already marked, select Start.
t If you are using a variable number of measurements, enter the desired number.
t If you are weighing live animals, place the container (cage) on the weighing
pan and tare the balance.
t Press Start to begin the task.
t Place the animal in the container.
y The measurement starts automatically; the defined number of measurements
and averaging is carried out.
y The calculated results are displayed.
t To display the average weight value, select Result.
t To view the calculated value on the display again, select Calc.
To Next Page
Loading...
