Section 03 ENGINE
Sub-Section 08 (EXHAUST SYSTEM)
03-08-5
SPX, XP, GSX and GTX Models
Disconnect water supply hose and water injection
hose at tuned pipe head.
1. Water supply hose
2. Water injection hose
Loosen exhaust hose collar
no. 1
at tuned pipe
cone outlet.
Remove clamp
no. 4
securing tuned pipe cone to
tuned pipe head.
Remove screws
no. 7
and nut
no. 8
with flat
washers
no. 9
at tuned pipe head flange.
Remove retaining screw
no. 23
of tuned pipe
head.
1. Screw
Remove tuned pipe head
no. 10
.
Remove both screws
no. 6
retaining tuned pipe
cone to engine.
F01D3YA
2
1
F01D7IA
F01D76A
1
F01D7KA
F01D7LA
To Next Page
Loading...
