Section 08 PROPULSION SYSTEM
Sub-Section 03 (DRIVE SYSTEM)
08-03-14
2, Small Clamp
To secure small clamp
no. 2
, place notch side of
plier on clamp embossment and squeeze plier.
1. Squeeze plier
LUBRICATION
All Models Except the XP and HX Models
Using a grease gun, carefully lubricate PTO fly-
wheel with synthetic grease (P/N 293 550 010),
until boot is just beginning to expand. At this
point, immediately stop greasing.
XP and HX Models
Lubricate mid bearing with synthetic grease (P/N
293 550 010).
1. Grease fitting
1
F02J0PB
F01I0BB
F05I09A
1
To Next Page
Loading...
