Sharp IV-S20 User Manual

13-2
Communication
13
*1 Measurement execution functions 1 to 4 can be executed when the MEAS TRIG INP I/F
(measurement start input I/F) is the SERIAL (general-purpose serial interface).
However, with the measurement execution 2, If the measurement start input I/F
has been set to CCD-TRIG (CCD trigger (camera 1)) or PARALLEL (parallel), the
IV-S20 only processes responses.
*2 Measurement execution functions 5 to 8 can be executed when the MEAS TRIG INP I/F
(measurement start input I/F) has been set to the CCD-TRIG (CCD trigger (camera 1))
and is controlled by sampled start instructions.
*3 When you want to change the object type using processing code (10 to 13, 18 to 1B), object
type change time is included in the measurement excecution time display on the monitor.
*4 Initialize both the stored data and the currently monitored data.
noitcnufgnissecorP
-ecorP
gniss
edoc
noitpircseD
.feR
egap
sretemarapllaezilaitinI06
gnidulcni(seulavlaitiniotnoitidnoctesllateS
.)aeragnittesmetsysdna,sgnittesO/I
31-31
snoitidnoctnemerusaemezilaitinI16
dengissaehtfosnoitidnoctnemerusaemteS
.seulavlaitiniotepytcejbo
egamiecnereferezilaitinI26.atadegamiecnereferraelC
snoitidnocO/IezilaitinI36
O/Ignidulcni(seulavlatiniotsnoitidnocO/IteS
.)aeragnittesmetsysdna,sgnittes
metsysezilaitinI46.seulavlaitiniehtotsnoitidnocmetsysehtteS
citsongaidfleS86.rorreerawdrahkcehC
tnemerusaemlaunaM
setanidrooc
gnidaeR07
launamrofsetanidroocehttuodaeR
)1dna0tniopnoitceted(tnemerusaem
41-31
gnitteS17
launamrofsetanidroocehtngissA
)1dna0tniopnoitceted(tnemerusaem
Initialization*4

Sharp IV-S20 Specifications

General

Brand	Sharp
Model	IV-S20
Category	Color Camera
Language	English