Sharp IV-S20

16-6
Specifications
16
16-3 Peripheral device
[1] Monochrome monitor IV-09MT specifications


Outlune dimensions drawings
Item Speicfications
Power input voltage
Input capacity
Signal voltage
Screen display resolution
Scan method
Scan frequency
Image size
Linearity
Image input connector
Image input impedance
Video output connector
Adjustment function
Storage ambient temperature
Operation ambient
temperature
Operation ambient humidity
Atmosphere
Vibration resistance
Shock resistance
Weight
Dimensions (mm)
Dielectrical strength
Insulation resistance
Accessories
90 to 110 VAC, 50/60 Hz
25 VA
1.0 Vp-p/75 ohms
900 scanning lines (center), 60 scanning lines (edge)
EIA 525 lines (2:1 interlace)
Horizontal : 15.75 kHz, vertical : 48 to 62 Hz
8% under scan
Horizontal : 10% or less, vertical : max. 10%
BNC
75 ohms/ High-Z
BNC
Brightness adjustment, contrast adjustment, vertical position
adjustment, horizontal position adjustment
Focal adjustment, vertical width adjustment, horizontal linearity
adjustment, sub-bright adjustment (used only by our service staff)
—20 to 60 °C
0 to 45 °C
35 to 85%RH (non-considering)
No corrosive gases
JIS C 0911 or equivalent
- Amplitude 0.15mm, (10 to 57 Hz), 9.8m/s
2
57 to 150 Hz),
No. of sweeps : 10 (1 octave/min.) 3 directions (X, Y, Z)
JIS C 0912 or equivalent 147m/s
2
(each 3 times in X,Y, and Z
directions)
Approx. 6 kg
220 (W) × 238(D) × 257(H) (except protuding portions)
AC1000V, 1 minute (between AC plug and shassis)
DC500V, 10M ohms or more (between AC plug and shassis）
One instruction manual
Front
Back
252220
227 238 238
252
11
(Unit : mm)